| DAS-20 |
50 |
31 |
20 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-25 |
50 |
39 |
25 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-31 |
50 |
49 |
31 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-40 |
50 |
63 |
40 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-53 |
50 |
83 |
53 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-60 |
50 |
94 |
60 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-73 |
50 |
115 |
73 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-93 |
50 |
146 |
93 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-112 |
50 |
176 |
112 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-20RD |
50 |
31 |
20 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-25RD |
50 |
39 |
25 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-31RD |
50 |
49 |
31 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-40RD |
50 |
63 |
40 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-53RD |
50 |
83 |
53 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-60RD |
50 |
94 |
60 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-73RD |
50 |
115 |
73 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-93RD |
50 |
146 |
93 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|
| DAS-112RD |
50 |
176 |
112 |
- Offers High Abrasion Resistance.
- DAS can assist in reducing the dangers of hose leaks or pinhole failure.
- MSHA Approval
|
- De-aerated compact woven nylon fibres (Polyamide 6)
- In test conditions the sleeve contained the sharp stream of hydraulic oil passing through a 0.8 mm Diameter pre-drilled hole when the pressure was raised to 800 bar and held for 1 minute
- Abrasion resistance exceeds the requirements of ISO 6945 (holds up to 50,000 cycles)
- Oil retention capability of 100 PSI pressure for 3 Minutes when tested to SAE J343
- Approved by USMSHA ( Fire resistance ) for the use in mines.
- Tested to ISO 8031 for electrical conductivity (anti-static)
- Melting point 225 degrees C +/- 10 degrees C
|