Product image coming soon
INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Designer Gasket - Purple Paste
PROTECT IAS55
Flange Seal Type IAS55 is a purple, smooth, thick paste. Easily applied, it cures once confined between the parts to form in place a tough, flexible gasket. IAS55 gives an instant low pressure seal
Brochure ready to generate
- Useful Hint
- Where gap size is large or where the surface is uneven, apply IA471 Activator to help the product cure through volume. IAS55 can be roller coated, screen printed, traced or pad applied.
- Properties
- Instant low pressure sealant. Forms any size or shape. Will not shrink or relax. IAS55 is flexible and will not crack
- Compatible Accelerators Primers
- IA471 Activator can be used, but up to 20% strength reduction may be incurred
- Cured Performance
- Full Cure Time: 12 hours Tensile Strength: 8 N/mm2. Static Shear Strength: 12.5 N/mm2
- Tech Features
- Resin: Modified Urethane Acrylate. Colour: Purple Paste. Cure Speed With Activator: <2 hours. Cure Speed Without Activator: Up to 12 hours. Viscosity: >1,000,000cps. Gap Fill: 0.5mm. Flash Point: >100 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.10
- Temperature Range
- -55 degrees C to + 150 degrees C
- Application
- Sealing & Gasketing. IAS55 is used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chainsaws, lawn mowers etc. Use IAS55 for dressing gaskets, spacers etc. Product is normally hand applied from the tube. Ensure parts are clean, dry and free from oil and grease
- Group Notes
- Designer Gasket - Purple Paste. IAS55 in 50 ml tube. Consult Pirtek for MSDS Sheets for all Industrial Assembly Products
| Item Code |
|---|
| IAS55-50 |